All public logs
Jump to navigation
Jump to search
Combined display of all available logs of PinWiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 23:38, 5 January 2024 Zitt talk contribs created page File:DuckScanCap.pdf (Cap kit available from Digikey for Duckscan CGM-1901CW.)
- 23:38, 5 January 2024 Zitt talk contribs uploaded File:DuckScanCap.pdf (Cap kit available from Digikey for Duckscan CGM-1901CW.)
- 01:24, 25 June 2017 Zitt talk contribs uploaded File:AS-2518-147 gnd bulletProofing-4.jpg (AS-2518-147 ground mods; step #4.)
- 01:21, 25 June 2017 Zitt talk contribs uploaded File:AS-2518-147 gnd bulletProofing-3.jpg (Step #3 of AS-2518-147 ground mods.)
- 01:19, 25 June 2017 Zitt talk contribs uploaded File:AS-2518-147 gnd bulletProofing-1.jpg
- 01:05, 25 June 2017 Zitt talk contribs uploaded File:AS-2518-147 gnd bulletProofing.jpg (Steps 1 and 2 of the ground mods for an AS-2418-147 combo solenoid and lamp board. ``image courtesy of Peter @ www.inkochnito.nl'' )
- 23:03, 1 May 2017 Zitt talk contribs uploaded a new version of File:Stng wingled kbopW.jpg (Pinball-Mods.com's DIY PCB set which replaces the bulb sockets with SMT LEDs so they are directed down toward the Playfield. Available in Red, Purple, and Warm White.)
- 22:56, 1 May 2017 Zitt talk contribs uploaded File:Stng wingled kbopW.jpg ([http://Pinball-Mods.com/url/stngKbo_pw Pinball-Mods.com]'s DIY PCB set which replaces the bulb sockets with SMT LEDs so they are directed down toward the Playfield. Available in Red, Purple, and Warm White.)
- 22:47, 1 May 2017 Zitt talk contribs uploaded File:Schematic 8-driver-mod-highlight.png (Highlighted schematic showing added resistors. Please consult your users manual for the complete schematics for this board.)
- 22:32, 1 May 2017 Zitt talk contribs uploaded File:10kRpackSolderSide.jpg (10k Rpack on Solderside pulling the 8 datalines low.)
- 22:25, 1 May 2017 Zitt talk contribs uploaded File:10kRComponetSide.jpg (STNG Bullet-proof 8Driver board for Tieback. 10k ohm resistor between CLK and +5V.)
- 20:49, 26 May 2012 Zitt talk contribs uploaded File:DE CN1 PPB.jpg (PPB CN1 connector burned Pin8 bad Pin1.)
- 20:21, 26 May 2012 Zitt talk contribs uploaded File:DE CN 2F2.jpg (Transformer Secondary side w/ burnt 2F2)
