Revision history of "File:SS Bally GI lighting tap 3.jpg"

Jump to navigation Jump to search

Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • curprev 01:43, 31 December 2020‎ Pb123 talk contribs‎ 618 bytes +618‎ Picture showing inside of cabinet, right flipper, before socket mount. I solder the wires to the anode and cathode of the socket, and screw the socket into the side of the cabinet with half-inch screws. I typically use the hex head screws as it's easier to get a grip on it. Don't use long screws! You could damage your cabinet. It's also important to note that I recommend flexible head #44 LEDs (as well as #44 socket of course) because invariably the light won't be exactly where you need...
Retrieved from "https://www.pinwiki.com/wiki/index.php/File:SS_Bally_GI_lighting_tap_3.jpg"