User contributions
Jump to navigation
Jump to search
- 14:59, 10 May 2024 diff hist +11 Bally 6803 →=
- 00:43, 10 May 2024 diff hist +39 Bally 6803 →=
- 00:42, 10 May 2024 diff hist +102 Bally 6803 →Repair Logs
- 00:41, 10 May 2024 diff hist 0 File:Bally 6803 PSU R3 R4 closeup for EzSBC mod.jpg Pb123 uploaded a new version of File:Bally 6803 PSU R3 R4 closeup for EzSBC mod.jpg current
- 00:37, 10 May 2024 diff hist +191 N File:Bally 6803 PSU R3 R4 closeup for EzSBC mod.jpg This shows a closeup of the modifications needed for replacement of the 78H05C with a new switching VRM, EzSBC. R4 and R3 are cut out. R3 is replaced with a jumper, 22ga wire.
- 00:29, 10 May 2024 diff hist +496 m Bally 6803 →Repair Logs
- 17:27, 8 July 2023 diff hist 0 File:WMSSystem6ROMConfig.jpg Pb123 uploaded a new version of File:WMSSystem6ROMConfig.jpg current
- 00:44, 31 December 2020 diff hist +82 m Add lighted flipper buttons to old SS pinball Added picture 3, showing where I route wiring to flipper LED sockets that will be added.
- 00:43, 31 December 2020 diff hist +618 N File:SS Bally GI lighting tap 3.jpg Picture showing inside of cabinet, right flipper, before socket mount. I solder the wires to the anode and cathode of the socket, and screw the socket into the side of the cabinet with half-inch screws. I typically use the hex head screws as it's easier to get a grip on it. Don't use long screws! You could damage your cabinet. It's also important to note that I recommend flexible head #44 LEDs (as well as #44 socket of course) because invariably the light won't be exactly where you need... current
- 00:38, 31 December 2020 diff hist +82 m Add lighted flipper buttons to old SS pinball Added second picture inside cabinet.
- 00:37, 31 December 2020 diff hist +319 N File:SS Bally GI lighting tap 2.jpg Picture two showing where I stapled down wires coming from the GI socket on the playfield, and where I split it with additional wiring for left and right buttons. Note that from the playfield, I brought the new wiring together with the existing wire bundle from the playfield to keep it neat and orderly. current
- 00:34, 31 December 2020 diff hist +82 m Add lighted flipper buttons to old SS pinball Added link to picture 1
- 00:33, 31 December 2020 diff hist +101 N File:SS Bally GI lighting tap 1.jpg Picture one showing where I tapped into GI lighting for the lighted flipper button mod. current
- 00:29, 31 December 2020 diff hist +1,415 N Add lighted flipper buttons to old SS pinball Description of parts/tools neeeded and brief description of installation.
- 00:21, 31 December 2020 diff hist +52 m Main Page/Navigation Added section : should be under mods? Didn't see that as a subcategory.... * Add lighted flipper buttons to old SS pinball
- 00:16, 31 December 2020 diff hist +258 Add/Enable Free Play →MPU-100/MPU-200
- 00:10, 31 December 2020 diff hist +215 N File:PXL 20201104 041722833.jpg Third picture showing switch mounted to coin mech bracket for free play on Stern MPU 100/200 games. Switch wired to coin switch. Be sure to insulate this switch so as not to short out to coin reject. current
- 00:07, 31 December 2020 diff hist +216 N File:PXL 20201104 050120743.jpg Second picture showing switch mounted to coin mech bracket for free play on Stern MPU 100/200 games. Switch wired to coin switch. Be sure to insulate this switch so as not to short out to coin reject. current
- 00:05, 31 December 2020 diff hist +207 N File:PXL 20201104 050105388.jpg This is where I mounted, and protected with heat shrink tubing, the leaf switch I connected to the coin switch. Note I drilled two holes as to mount the leaf switch onto the coin mech bracket. current
- 00:00, 31 December 2020 diff hist +554 Add/Enable Free Play →MPU-100/MPU-200
