Difference between revisions of "What is a Pinball Machine Worth?"
| Line 1: | Line 1: | ||
{{WIP}} | {{WIP}} | ||
==Prices== | ==Prices== | ||
| − | The value of a pinball machine | + | The value of a pinball machine depends on a lot of factors. A totally restored Medieval Madness might sell to a serious collector for well in excess of $10,000. A pinball dealer might offer $5000 for the same machine a week later. A collector might want $7,500 for one. A tire-kicker might offer $3000 because the machine is "not original" and so on. |
| − | + | Price is dependent on a variety of factors, such as desirability, availability, location and condition. Guides, like [http://user.xmission.com/~daina/pinlist_info.html Mr. Pinball List], are available that track the price on an annual basis, but these are a rough guide at best. Sites like [http://www.pinpedia.com/prices Pinpedia] list past auction prices. Unfortunately 'shilling' and other nefarious practices can happen on online auction sites, so take the results with a pinch of salt. And be aware of the difference between asking and getting on eBay. Just because a machine has a 'Buy it now' for $3k doesn't mean it will sell for $3k. | |
| − | A dirty machine, without serious damage, can take 40 hours to clean up and $400 in plastics, rubbers, lamps and materials. Add another $200 for legs, door and trim. Playfield swaps add another 40 hours and $600 - $900 for the playfield. And cabinet decals are another 20 hours plus $300 for the decals. | + | Repairs have substantial cost. A dirty machine, without serious damage, can take 40 hours to clean up and $400 in plastics, rubbers, lamps and materials. Add another $200 for legs, door and trim. Playfield swaps add another 40 hours and $600 - $900 for the playfield. And cabinet decals are another 20 hours plus $300 for the decals. That's a lot, even if you work for free. |
| − | + | Too often it seems people will 'discover' an old, undesirable, beat up machine in the back of their garage and assume as they just saw an Addams Family on eBay with a 'Buy it now' of $6k, then their antique Williams Darling is a bargain at just $3k! It can be hard trying to explain the reality of the situation to the would-be seller. | |
| − | Rarity does not necessarily mean a higher price | + | Rarity does not necessarily mean a higher price: fun games cost more, and if game was good, it tended to get produced a lot. |
| − | This is | + | This is most evident with 'Addams Family', a well regarded table and the highest production run of the modern pinball era. This machine still commands a high price even though there were 21,000 made. Contrast this with Hurricane, produced around the same time, but can be found for a fraction of the price. |
There are exceptions to this rule, including prototype machines and limited runs like Big Bang Bar and LOTR:Limited Edition (Gold Trim) | There are exceptions to this rule, including prototype machines and limited runs like Big Bang Bar and LOTR:Limited Edition (Gold Trim) | ||
| Line 17: | Line 17: | ||
Broadly speaking, pinball machines price out into several groups. Each group has a high and low section. This list is only an example, as mentioned above there are many factors that can affect the price. | Broadly speaking, pinball machines price out into several groups. Each group has a high and low section. This list is only an example, as mentioned above there are many factors that can affect the price. | ||
| − | The high dollar machines tend to be modern solid-state machines with DMD displays. These machines have very broad appeal. Also, their parts are worth almost $1000 (electronics + display + transformer + mechanisms), which sets a floor for the value. Older machines appeal to a narrower audience, and so the price tends to be lower. | + | The high dollar machines tend to be modern solid-state machines with DMD displays. These machines have very broad appeal. Also, their parts are worth almost $1000 (electronics + display + transformer + mechanisms), which sets a floor for the value. Older machines appeal to a narrower audience, and so the price tends to be lower. Of course, there are still high dollar EM machines. |
==='90s and newer=== | ==='90s and newer=== | ||
| Line 61: | Line 61: | ||
====The "D" List==== | ====The "D" List==== | ||
| − | Under $2,000 | + | Under $2,000 |
* [[Demolition Man]] | * [[Demolition Man]] | ||
| Line 70: | Line 70: | ||
Most '70s games can be had for less than $1000. Most '80s games are less than $2000. There are many exceptions. | Most '70s games can be had for less than $1000. Most '80s games are less than $2000. There are many exceptions. | ||
| − | '70s and '80s games haven't held up as well as '90s games. | + | '70s and '80s games haven't held up as well as '90s games. The playfields tend to wear more, because they lack the protective Diamondplate that stared appearing on playfields around 1990. Games that get full restorations, perhaps including playfield swaps, can be over $2000 or perhaps higher. |
| − | Relatively expensive titles include Black Knight | + | Relatively expensive titles include: |
| + | * Black Knight | ||
| + | * Black Knight 2000 | ||
| + | * Eight Ball Deluxe | ||
| + | * Fathom | ||
| + | * Firepower | ||
| + | * High Speed. | ||
Relatively cheaper titles include Frontier, Meteor. | Relatively cheaper titles include Frontier, Meteor. | ||
| − | Gottlieb and Stern titles | + | Gottlieb and Stern titles tend to cost somewhat less. |
=== EM games === | === EM games === | ||
| Line 82: | Line 88: | ||
As a rule, single-player EMs are more desirable. Multi-player EMs are less desirable. Almost all are less than $1000. | As a rule, single-player EMs are more desirable. Multi-player EMs are less desirable. Almost all are less than $1000. | ||
| − | Some games, like Fireball, can be fairly expensive. | + | Some games, like Fireball, Wizard, and Captain Fantastic, can be fairly expensive. |
Most EMs prior to the '70s had fairly short runs. A lot of ads will claim, "Only 600 made!" But 600 was a pretty respectable run for many games in the '50s. For an add-a-ball in the '70s, 600 can still be a respectable run. | Most EMs prior to the '70s had fairly short runs. A lot of ads will claim, "Only 600 made!" But 600 was a pretty respectable run for many games in the '50s. For an add-a-ball in the '70s, 600 can still be a respectable run. | ||
Revision as of 04:22, 28 May 2012
 |
1 Prices
The value of a pinball machine depends on a lot of factors. A totally restored Medieval Madness might sell to a serious collector for well in excess of $10,000. A pinball dealer might offer $5000 for the same machine a week later. A collector might want $7,500 for one. A tire-kicker might offer $3000 because the machine is "not original" and so on.
Price is dependent on a variety of factors, such as desirability, availability, location and condition. Guides, like Mr. Pinball List, are available that track the price on an annual basis, but these are a rough guide at best. Sites like Pinpedia list past auction prices. Unfortunately 'shilling' and other nefarious practices can happen on online auction sites, so take the results with a pinch of salt. And be aware of the difference between asking and getting on eBay. Just because a machine has a 'Buy it now' for $3k doesn't mean it will sell for $3k.
Repairs have substantial cost. A dirty machine, without serious damage, can take 40 hours to clean up and $400 in plastics, rubbers, lamps and materials. Add another $200 for legs, door and trim. Playfield swaps add another 40 hours and $600 - $900 for the playfield. And cabinet decals are another 20 hours plus $300 for the decals. That's a lot, even if you work for free.
Too often it seems people will 'discover' an old, undesirable, beat up machine in the back of their garage and assume as they just saw an Addams Family on eBay with a 'Buy it now' of $6k, then their antique Williams Darling is a bargain at just $3k! It can be hard trying to explain the reality of the situation to the would-be seller.
Rarity does not necessarily mean a higher price: fun games cost more, and if game was good, it tended to get produced a lot.
This is most evident with 'Addams Family', a well regarded table and the highest production run of the modern pinball era. This machine still commands a high price even though there were 21,000 made. Contrast this with Hurricane, produced around the same time, but can be found for a fraction of the price.
There are exceptions to this rule, including prototype machines and limited runs like Big Bang Bar and LOTR:Limited Edition (Gold Trim)
Broadly speaking, pinball machines price out into several groups. Each group has a high and low section. This list is only an example, as mentioned above there are many factors that can affect the price.
The high dollar machines tend to be modern solid-state machines with DMD displays. These machines have very broad appeal. Also, their parts are worth almost $1000 (electronics + display + transformer + mechanisms), which sets a floor for the value. Older machines appeal to a narrower audience, and so the price tends to be lower. Of course, there are still high dollar EM machines.
1.1 '90s and newer
Here are some broad categories of '90s and newer games. Note that these prices are still somewhat arbitrary. A Judge Dredd, retail, delivered, with warranty, and all original, might still be $4000. Or, a really rough Addams Family can be found for $3000 -- maybe.
1.1.1 Exceptions
Pinball machines that can exceed $10,000.
- Big Bang Bar
- Medieval Madness (premium restoration)
- Cactus Canyon
1.1.2 The "A" List
$4000 and up
1.1.3 The "B" List
$3000 - $4000
- Attack from Mars
- Circus Voltaire
- Safecracker
- Lord of the Rings
- Spider-Man
- Theatre of Magic
- The Simpsons' Pinball Party
- Indiana Jones: The Pinball Adventure (Williams version, not Stern)
- Twilight Zone
1.1.4 The "C" List
$2000 - $3000
1.1.5 The "D" List
Under $2,000
1.2 '70s and '80s solid state
Most '70s games can be had for less than $1000. Most '80s games are less than $2000. There are many exceptions.
'70s and '80s games haven't held up as well as '90s games. The playfields tend to wear more, because they lack the protective Diamondplate that stared appearing on playfields around 1990. Games that get full restorations, perhaps including playfield swaps, can be over $2000 or perhaps higher.
Relatively expensive titles include:
- Black Knight
- Black Knight 2000
- Eight Ball Deluxe
- Fathom
- Firepower
- High Speed.
Relatively cheaper titles include Frontier, Meteor.
Gottlieb and Stern titles tend to cost somewhat less.
1.3 EM games
As a rule, single-player EMs are more desirable. Multi-player EMs are less desirable. Almost all are less than $1000.
Some games, like Fireball, Wizard, and Captain Fantastic, can be fairly expensive.
Most EMs prior to the '70s had fairly short runs. A lot of ads will claim, "Only 600 made!" But 600 was a pretty respectable run for many games in the '50s. For an add-a-ball in the '70s, 600 can still be a respectable run.
2 Location
If you're in California, games cost a little more. If you're in Chicago or the midwest U.S., games cost a little less.
3 Resale value
In general, if the machine is well looked after you tend not to lose money when the time comes to sell it on. They can take a while to sell, depending on what price you set and current market conditions.
4 Aftermarket Modifications
Some people prefer completely original machines, while others like to fit various modifications to the table. These can vastly affect the price depending on which mods have been fitted, some people pay more for original unmolested tables, whereas others will pay extra for a table that has been fitted with after market modifications.