Search results
Jump to navigation
Jump to search
Page title matches
- [PHOTO] A flipper has a few key parts: there's the bat, above the playfield, the flipper button. This coil pulls in a plunger, which in turn is attached to17 KB (2,852 words) - 00:40, 15 October 2019
- You can add lighted flipper buttons (for a really cool look) to any old solid state - even electromecha ...be sourced from the coin door insert GI, which would be much closer to the flipper buttons.2 KB (304 words) - 03:47, 3 January 2021
Page text matches
- ==Flipper Catch== ==Flipper Hold==189 bytes (26 words) - 23:57, 19 January 2012
- ...The left flipper returns the ball to the very top of playfield. The right flipper sends the ball through the spinning target to the upper playfield area.1 KB (174 words) - 14:44, 28 March 2020
- === Flipper Problems ===708 bytes (69 words) - 10:05, 5 January 2023
- |23A-6505 || 3/8 x 1-1/2" Standard Red Flipper |23A-6519 || 1/2 x 1-1/2" Standard Red Flipper942 bytes (128 words) - 09:41, 9 March 2023
- ...is by moving the link under the playfield, and looking for play before the flipper arm moves. Replacing the link is all that most tuneups need. ...wrench has a ratcheting head, which makes it much easier to crank down the flipper bat clamp. You will also need a Philips head screwdriver, a XXX hex wrench,2 KB (408 words) - 11:19, 22 May 2011
- ...ding coil, similar to a flipper coil. Since these coil systems are like a flipper coil, they use end of stroke (EOS) switches. Check to make certain that th995 bytes (160 words) - 05:04, 26 October 2012
- ===Flipper problems===923 bytes (121 words) - 08:08, 12 March 2020
- ...es the playfield to get to the top rollover arches / 3 Flippers with extra flipper providing a looping shot ...d a matching Game ROM released, as opposed to the original System 4 Yellow Flipper ROMs. The updated ROMs can also be run on the System 4 MPU boards.<br>1 KB (233 words) - 05:46, 11 March 2014
- ...System 3 game [[Contact]] was also the first Widebody to use this type of flipper arrangement.932 bytes (129 words) - 17:59, 14 May 2011
- | Small Red Beaded Flipper246 bytes (30 words) - 22:38, 15 December 2012
- Chicago Gaming Company uses Williams WPC style flipper assemblies using normally open gold flashed contacts on the end of stroke s === Flipper Problems ===2 KB (275 words) - 01:21, 2 February 2024
- ...es the solenoids; drives the lamp matrix; drives the GI lamps; and detects flipper switch operation in non-Fliptronics machines. ...e:WPC_Power_-Driver_Board.jpg|200px|thumb|left|WPC Power-Driver board with Flipper Relay]]1 KB (176 words) - 00:29, 25 April 2011
- | Flipper269 bytes (29 words) - 22:41, 15 December 2012
- | 3/8"x 1 1/2" Flipper287 bytes (31 words) - 22:39, 15 December 2012
- | Flipper Rubber275 bytes (29 words) - 22:36, 15 December 2012
- ...cores Wheel Value)||Drop Target Reset||#1 Pop Bumper (Top)||#2 Pop Bumper||Flipper Enable||Right Sling||n/u||n/u||Coin Lockout ...Sling||Bottom Pop Bumper||Left Drop Target Reset||Right Drop Target Reset||Flipper Enable||Left Sling||n/u||n/u||Coin Lockout20 KB (3,788 words) - 10:35, 6 April 2018
- | Flipper Rubber270 bytes (29 words) - 22:38, 15 December 2012
- There are two main colors of pinball ring rubber, black and white. Flipper rubber has always been available in black and white as well, along with red ...nded for home use the preference is to use white rubber rings and a softer flipper rubber (so not black). Some games just look better in all black rubber, so6 KB (1,137 words) - 07:19, 5 February 2022
- ==Right Flipper Can Be Activated In Attract Mode== ...t flipper can be activated in attract mode, it's likely that a leaf on the flipper switch is making contact with the bell end of the shooter lane's plunger.5 KB (859 words) - 22:57, 3 July 2019
- | Flipper Rubber313 bytes (36 words) - 22:37, 15 December 2012