Bally 6803

Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.

Click to go back to the Bally/Stern solid state repair guides index.

1 Introduction

Put system info here

Bally 6803 Board Set

2 Games

• Atlantis
• Beat the Clock
• Black Belt
• Blackwater 100
• City Slicker
• Dungeons & Dragons
• Eight Ball Champ
• Escape from the Lost World
• Hardbody
• Heavy Metal Meltdown
• Lady Luck
• Motordome
• Party Animal
• Special Force
• Strange Science
• Truck Stop

3 Technical Info

3.1 CPU Board

3.1.1 CPU Board ROM Info and Jumper Settings

Game	U2	U3	Jumpers
Eight Ball Champ	Not Used	0838-00803-0005	2, 4, 6, 8, 10
Beat the Clock	Not Used	0C70-00803-0005	2, 4, 6, 9, 10
Lady Luck	Not Used	0E34-00803-0005	2, 4, 6, 8, 10
Motor Dome	E14A-42AAE-BX40	E14A-42AAE-CX4D	2, 4, 6, 8, 10
Black Belt	0E52-00803-0001	0E52-00803-0002	2, 4, 6, 8, 10
Special Force	0E47-00803-0004	0E47-00803-0005	2, 4, 6, 9, 10
Strange Science	0E35-00803-0001	0E35-00803-0002	2, 4, 6, 9, 10
City Slicker	0E79-00803-0002	0E79-00803-0003	2, 4, 6, 9, 10
Hard Body	E94A-12601-0000	E94A-12602-0000	2, 4, 6, 9, 10
Party Animal	H01A-12601-0000	H01A-12602-0000	2, 4, 6, 9, 10
Heavy Metal Meltdown	H03A-12601-0000	H03A-12602-0000	2, 4, 6, 9, 10
Dungeons & Dragons	H06A-12601-0000	H06A-12602-0000	2, 4, 6, 9, 10
Escape from the Lost World	H05A-12601-0000	H05A-12602-0000	2, 4, 6, 8, 10
Blackwater 100	H07A-12601-0000	H07A-12602-0000	2, 4, 6, 9, 10
Truck Stop	H08A-12601-0000	H08A-12602-0000	2, 4, 6, 9, 10
Atlantis	2006-12601-0000	2006-12602-0000	2, 4, 6, 9, 10

4 Problems and Fixes

4.1 Power Driver Issues

This may not apply to some, as MPU might have been part of it.

4.4 Display Driver Board

Possibly doesn't apply to some, can't think of an example.

4.5 Coins Register But Don't Credit Up

This is commonly seen on VPinMAME emulation, but applies to real life as well.

Coins drop OK, switch is good, game makes noise, but it remains on "Credits 0" and doesn't credit up.

Symptom is corrupted/blank NVRAM.

To fix, open coin door (make sure coin door switch is working, otherwise the keypad won't work), then do these steps:

Hit "Test", to enter operator mode.

Hit "A" until "Feature Options" is displayed.

Hit Enter.

It will say "Reset Factory Is".

Hit 6, then 5, then Enter.

Hit "Game" to return to attract mode. You'll know it worked because it will take longer than usual to reach attract mode, and the display will flicker slightly as the computer clears the memory (this is normal).

Intuitive and easy to remember, right? And Bally had the nerve to advertise "manual-free testing"....

5 Game Specific Problems and Fixes

Example would be servo controller on Independence Day pinball

6 Repair Logs

Did you do a repair? Log it here as a possible solution for others.