Bally 6803
 |
Click to go back to the Bally/Stern solid state repair guides index.
1 Introduction
Put system info here
2 Games
- Atlantis
- Beat the Clock
- Black Belt
- Blackwater 100
- City Slicker
- Dungeons & Dragons
- Eight Ball Champ
- Escape from the Lost World
- Hardbody
- Heavy Metal Meltdown
- Lady Luck
- Motordome
- Party Animal
- Special Force
- Strange Science
- Truck Stop
3 Technical Info
3.1 CPU Board
3.1.1 CPU Board ROM Info and Jumper Settings
| Game | U2 | U3 | Jumpers |
|---|---|---|---|
| Eight Ball Champ | Not Used | 0838-00803-0005 | 2, 4, 6, 8, 10 |
| Beat the Clock | Not Used | 0C70-00803-0005 | 2, 4, 6, 9, 10 |
| Lady Luck | Not Used | 0E34-00803-0005 | 2, 4, 6, 8, 10 |
| Motor Dome | E14A-42AAE-BX40 | E14A-42AAE-CX4D | 2, 4, 6, 8, 10 |
| Black Belt | 0E52-00803-0001 | 0E52-00803-0002 | 2, 4, 6, 8, 10 |
| Special Force | 0E47-00803-0004 | 0E47-00803-0005 | 2, 4, 6, 9, 10 |
| Strange Science | 0E35-00803-0001 | 0E35-00803-0002 | 2, 4, 6, 9, 10 |
| City Slicker | 0E79-00803-0002 | 0E79-00803-0003 | 2, 4, 6, 9, 10 |
| Hard Body | E94A-12601-0000 | E94A-12602-0000 | 2, 4, 6, 9, 10 |
| Party Animal | H01A-12601-0000 | H01A-12602-0000 | 2, 4, 6, 9, 10 |
| Heavy Metal Meltdown | H03A-12601-0000 | H03A-12602-0000 | 2, 4, 6, 9, 10 |
| Dungeons & Dragons | H06A-12601-0000 | H06A-12602-0000 | 2, 4, 6, 9, 10 |
| Escape from the Lost World | H05A-12601-0000 | H05A-12602-0000 | 2, 4, 6, 8, 10 |
| Blackwater 100 | H07A-12601-0000 | H07A-12602-0000 | 2, 4, 6, 9, 10 |
| Truck Stop | H08A-12601-0000 | H08A-12602-0000 | 2, 4, 6, 9, 10 |
| Atlantis | 2006-12601-0000 | 2006-12602-0000 | 2, 4, 6, 9, 10 |
4 Problems and Fixes
4.1 Power Driver Issues
This may not apply to some, as MPU might have been part of it.
4.2 MPU Issues
4.3 Power Supply Issues
4.4 Display Driver Board
Possibly doesn't apply to some, can't think of an example.
4.5 Coins Register But Don't Credit Up
This is commonly seen on VPinMAME emulation, but applies to real life as well.
Coins drop OK, switch is good, game makes noise, but it remains on "Credits 0" and doesn't credit up.
Symptom is corrupted/blank NVRAM.
To fix, open coin door (make sure coin door switch is working, otherwise the keypad won't work), then do these steps:
Hit "Test", to enter operator mode.
Hit "A" until "Feature Options" is displayed.
Hit Enter.
It will say "Reset Factory Is".
Hit 6, then 5, then Enter.
Hit "Game" to return to attract mode. You'll know it worked because it will take longer than usual to reach attract mode, and the display will flicker slightly as the computer clears the memory (this is normal).
Intuitive and easy to remember, right? And Bally had the nerve to advertise "manual-free testing"....
5 Game Specific Problems and Fixes
Example would be servo controller on Independence Day pinball
6 Repair Logs
Did you do a repair? Log it here as a possible solution for others.