Bally 6803

From PinWiki
Jump to navigation Jump to search
ExclamationPoint.jpg
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.


1 Introduction

Put system info here


Bally 6803 Board Set


2 Games

3 Technical Info

Things like Data East's controller board was a copy of William's System 11 with some changes would go here.

3.1 MPU Board

3.1.1 MPU Board Jumper Settings

4 Problems and Fixes

4.1 Power Driver Issues

This may not apply to some, as MPU might have been part of it.

4.2 MPU Issues

4.3 Power Supply Issues

4.4 Display Driver Board

Possibly doesn't apply to some, can't think of an example.

5 Game Specific Problems and Fixes

Example would be servo controller on Independence Day pinball

6 Repair Logs

Did you do a repair? Log it here as a possible solution for others.